29
Using the TV’s features (General)
TV Mounting
Reset
Cancel
Stand
Sound Navigation
+20
0
-20
330
1K
3.3K
10K [Hz]
0
0
0
0
0
[Level]
Equalizer
100
5
Repeat step 4 for other frequencies�
6
Press
EXIT
to confirm your adjustments
To cancel the selection or adjustment, select
Cancel
on the screen and press
OK
�
To revert selections and adjustments to the factory
settings, select
Reset
on the screen and press
OK
�
Using the Advanced Sound Settings
Surround
and
Dynamic Bass Boost
help to create an
enhanced surround sound experience with deep, rich bass
from stereo sound sources. Your TV’s audio will sound
fuller, richer, and wider�
Voice Enhancement
helps to emphasize dialogue� It
will be easier to hear voices over other background audio�
1
From the
Advanced Sound Settings
, press
s
or
r
to select
Surround
�
2
Press
v
or
w
to select
Off
,
Spatial
or
Cinema
�
Voice Enhancement
: To turn the vocal emphasis
effect
On
or
Off
�
Dynamic Bass Boost
:To select the desired bass
expansion level (
Off
,
Low
,
or
High
)�
Using Dolby Volume
This feature provides a consistent sound volume regardless
of programmes, channels or input sources�
1
From the
Sound
menu, press
s
or
r
to select
Dolby Volume
�
2
Press
v
or
w
to select
Low
,
High
or
Off
�
Notes:
•
This feature does not affect the audio signal output
from the DIGITAL AUDIO OUT terminal.
•
If you feel it is hard to listen to audio due to signal
status, turn off
Dolby Volume
.
•
This feature will automatically switch
Off
when
Dynamic Range Control
is set to
On
or
Digital
Audio Output
is set to
Auto
.
Adjusting Audio Level Offset
Sometimes there can be large changes in volume when
switching from a DTV 5�1ch to a DTV 2ch, an ATV
channel, or an external input� Using this feature reduces
these volume differences�
1
Set the volume level usually used when watching a
5�1ch programme�
2
Tune to a channel which is DTV 2ch, ATV or an
external input�
3
From the
Sound
menu, press
s
or
r
to select
Audio Level Offset
and press
OK
�
4
Press
s
or
r
to select an option and press
v
or
w
to
adjust the volume level�
0
0
-5
Audio Level Offset
ATV
DTV 2ch
External Input
Notes:
•
The available item changes depending on the
current input source. For example, when watching
a DTV 2ch programme, only DTV 2ch is available
and the other two items are greyed out in the menu.
This allows you to easily adjust according to each
condition.
•
When watching a DTV 5.1ch programme, this
feature is not available.
Headphone Settings
This setting is used to set the sound output when
headphones are connected�
Speaker
Link
Headphone
Speakers
On
Sound is output
(
2
– + is available�)
No sound
Off
Sound is output
(Headphone level
menu is available�)
Sound is output
(
2
– + is available�)
1
From the
Sound
menu, press
s
or
r
to select
Headphone Settings
and press
OK
�
2
Press
s
or
r
to select
Speaker Link
and press
v
or
w
to select
On
or
Off
�
3
If you select
Off
, next select
Headphone Level
and
press
v
or
w
to adjust the headphone sound�
50
Headphone Settings
Headphone Level
Speaker Link
Off
110809c1_47VL800A_En.indb 29
11.8.9 12:59:23
