37
4300 Series Installation and Operation Manual
12.5 Header Bar
The Header Bar on the graphic display panel displays three system parameters: the System Load, Cur-
rent Status, and System Time.
Header Bar Components
No.
Function
1
System Load
- Load per each phase as percent of full load.
Low
- Less than 10% Load.
2
Current Status
- UPS status at the moment. (Status is delayed by a few seconds)
3
System Time
- Current time in AM-PM format
FIGURE 12.4 – HEADER BAR DISPLAY COMPONENTS
12.6 Footer Bar
The Footer Bar on the graphic display panel displays three system parameters:
Footer Bar Components
No.
Function
1
Fault
- Displays last fault sensed by UPS. A Fault causes the UPS to switch to bypass
and it will not automatically reset.
2
Warning
- Displays last warning sensed by UPS. Multiple frequent warnings of the same
type may induce a fault condition.
3
UPS Mode
- Selected operating mode.
FIGURE 12.5 – FOOTER BAR DISPLAY COMPONENTS
2
1
3
2
1
3
INVOL
UPSOL
BYPASS
