54
CONTROLS AND FEATURES
En
glish
The television can be set to turn itself
Off
after a certain length
of time.
a
In the
APPLICATIONS
menu, press
b
to select
Sleep
Timer
. Use the number buttons to set the desired time.
For example, to switch the television off in one and a
half hours enter 01:30, or press
c
/
C
to increase/
decrease in steps of 10 minutes. (Maximum time
setting is 12 hours)
b
Press
EXIT
to finish.
c
To cancel the
Sleep Timer
, enter all zeros for the
above setting.
Energy Saving Settings
The TV will automatically turn itself off (standby) after 4 hours,
if you do not operate the TV either from the remote control or
the TV control panel.
a
In the
PREFERENCES
menu, highlight
Energy Saving
Settings
and press
Q
.
b
Press
B
or
b
to select
Automatic Power Down
.
c
Press
C
or
c
to select
On
or
Off
, and press
Q
.
NOTE:
• This feature is set to
On
when
Location
is set to
Home
.
• 1 minute before switching to standby, a Warning message
will appear.
• When the following features are set, the feature that is set
for the nearest time will function.
- Automatic Power Down
- Sleep Timer
- Photo Frame/Auto Power Off
- Auto shutdown after 1 hour of inactivity (after power on by
On Timer)
- No signal auto power off (after 15 minute of no signal)
The TV will automatically turn itself off after 15 minutes when no
signal is detected. You can change the setting to Off for the
following purposes:
• Low signal strength of analog channel (no signal detection)
• Only Audio L/R is connected to external input to listen to
music through the TV speakers.
a
In the
Energy Saving Settings
menu, highlight
No
Signal Power Down
, and press
Q
.
b
Press
B
or
b
to highlight the item you want to change,
and press
C
or
c
to select
On
or
Off
.
NOTE:
• Default setting is all On.
• A warning message will appear 1 minute before turning off.
Sleep Timer
Automatic Power Down
No Signal Power Down
WL75_WebOM_UK.book Page 54 Thursday, June 17, 2010 7:10 PM
