English
- 24 -
English
Configuring Picture Settings -
continued
Dynamic Contrast:
You can change contrast rate by
using dynamic contrast function. Dynamic contrast
can be set to one of these options:
Low
,
Medium
,
High
or
Off.
Colour Temp
: Colour Temperature increases the
‘warmth’ or ‘coolness’ of the picture by increasing the
red or blue tint.
Picture Zoom
: Sets the picture size to
Auto
,
16:9
,
Subtitle,14:9
,
14:9
Zoom
,
4:3
or
Cinema.
Press
MENU
button and select
Picture
by using
Left
or
Right
button. Press
Up
or
Down
button to select
Picture Zoom
.
Full Mode (optional):
If you connect a device via
HDMI or YPbPr connectors and set 1080i/1080p
resolutions, Full Mode item will be visible.
HDMI True Black (optional):
While watching from
HDMI source, this feature will be visible in the Picture
Settings menu.
You can use this feature to enhance blackness in the
picture. You can set this feature as “On” for activating
HDMI True Black mode.
Note:
HDMI True Black On/Off feature functions only
when the HDMI device output is set to RGB.
Film Mode (optional)
: Films are recorded at a
different number of frames per second to normal
television programmes.Press “ ” or “ ” buttons to
select Film mode. Press “ ” or “ ” buttons to set
this feature Auto or Off. Turn this feature to Auto
when you are watching films to see the fast motion
scenes clearly.
Skin Tone
:
Adjust the desired skin tone.
Colour Shift:
Adjust the desired colour tone. Press
MENU
button and select
Picture
by using
Left
or
Right
button. Press
Up
or
Down
button to select
Colour Shift
.
RGB Gain
: Press
OK
button to edit RGB gain. You
can configure the colour temperature values using
the RGB Gain feature.
Reset
This feature allows you to reset the current Picture
Settings to the default values. Press
MENU
button and
select
Picture
by using
Left
or
Right
button. Press
Up
or
Down
button to select
Reset
and press
OK
button.
Note:
The reset function does not reset the settings for
Mode, Colour Temp, Noise Reduction, Picture Zoom
and HDMI True Black.
