English
- 16 -
English
Auto Tuning
Auto Tuning
As new services are broadcast, it will be necessary to
retune the television in order to view them.
• Auto Tuning will completely retune the television
and can be used to update the channel list. It is
recommended that Auto Tuning is run periodically
to ensure that all new services are added. All current
channels and settings, i.e. locked channels, will
be lost.
• Press
MENU
button on the remote control and select
Install and Retune
by using
Left
or
Right
button.
Press
OK
button and the following menu screen
will be displayed.
• Select
Automatic Channel Scan (Retune)
by using
Up
or
Down
button and press
OK
button. Automatic
Channel Scan options will be displayed. You can select
options by using
Up
or
Down
and
OK
buttons.
Auto Channel Scan Menu Operation
Digital:
Searches and stores aerial DVB stations.
Analogue:
Searches and stores analogue stations.
Full:
Searches and stores both analogue and DVB
aerial stations and both analogue and DVB cable
stations.
• Whenever you select an automatic search type and
press
OK
button, a confirmation screen will appear
on the screen. To start installation process, select
Yes
, to cancel select
No
by using
Left
or
Right
and
OK
button.
• After auto channel scan type is set and selected
and confirmed, installation process will start and
progress bar will move along. Press
MENU
button
to cancel process. In such a case, located channels
are not stored. The television will start to search for
all available stations. You must allow the television
to complete the search.
Manual
Tuning, Fine
Tuning
The television can be tuned-in manually using
Manual Search feature.
Digital Aerial Manual Search
The feature is available for service engineers or
can be used for direct channel entry if the multiplex
channel is known.
• Select
Manual channel scan
from the
Install and
Retune
menu
and press
OK.
After selecting search type as
Digital Aerial
, you
can enter the multiplex or frequency number using
the numeric buttons and press
OK
button to search.
• Enter the multiplex number using the numeric
buttons. The television will automatically search
for that multiplex. When the multiplex is found any
channels not currently on the programme list will be
added and the programme information at the top of
the screen will be updated.
• Repeat as necessary.
Digital Cable Manual Search
• In cable manual scan, you can enter frequency,
modulation, symbol rate and network channel scan
options. After selecting search type as
Digital Cable
,
you can set the desired options and press
OK
button
to search.
