51
Setting up your TV
Viewing the digital signal meter
4
To save the setting, highlight
Done
, and then press the
ENTER
button.
Because the PC and HDMI1 inputs share the same set of analog
audio inputs, the PC Audio menu setting influences the HDMI 1
Audio menu setting. If PC Audio is set to “No” the HDMI 1 Audio
setting changes to “Auto.” If PC Audio is set to “Yes” the HDMI 1
Audio setting is set to “Digital” and is grayed out in the menu. See
“Setting the PC Audio” on page 91
.
Viewing the digital signal meter
You can view the digital signal meter in the ANT/ CABLE digital
TV input source only.
To view the digital signal meter:
1
Press the
MENU
button to open the
Setup
menu.
2
Highlight
Installation
, and then press the
ENTER
button.
A new set of Installation menu icons appears.
3
Open the
Terrestrial
menu, highlight
Signal Meter
, and then
press the
ENTER
button.
4
Press the ( / / / arrow) buttons to select the antenna input
and digital channel signal you wish to check.
❖
The physical digital channel number listed in the Signal Meter
screen may not correspond to a virtual TV channel number.
Contact your local broadcasters to obtain the RF channel
numbers for your local digital stations.
❖
The signal strength does not change between virtual channels on
the same physical channel.
Mode:
Description:
Auto
When viewing the HDMI 1 input, if digital audio from the HDMI
®
input is available, it will be output. If not, the TV will automatically
detect and output analog audio from the PC Audio input.
Digital
When viewing the HDMI 1 input, digital audio from the HDMI
®
input will be output.
Analog
When viewing the HDMI 1 input, analog audio from the PC Audio
input will be output.
NOTE
NOTE
