104
Using the TV’s features
Displaying TV status information
When you turn on the Audio Receiver, change its input source or
adjust the sound volume, the sound will be output from the audio
receiver’s speakers even if TV Speakers has been selected. Turn the
TV off and on again to output the sound from the TV speakers.
Setting up REGZA-LINK
®
To access the REGZA-LINK
®
Setup:
1
From the
Setup
menu, highlight
REGZA-LINK Setup
and
press the
ENTER
button.
2
Press the ( / arrow) buttons to highlight
Enable
REGZA-LINK
.
3
Press the (
/
arrow) buttons to select
On
.
If you select Enable REGZA-LINK
®
Off, the other items will be grayed
out.
4
Press the ( / arrow) buttons to highlight the
REGZA-LINK
Setup
item you want to use, and press the (
/
arrow) buttons
to select
On
or the desired mode.
❖
TV Auto Input Switch:
On/Off
❖
TV Auto Power:
On/Off
❖
Device Auto Standby:
On/Off
❖
Speaker Preference:
TV Speakers/Audio Receiver
5
To save the new settings, highlight
Done
and press the
ENTER
button.
To revert to the factory defaults, highlight
Reset
and press the
ENTER
button.
Displaying TV status information
To display TV status information using the
RECALL
button:
❖
Press the
RECALL
button on the remote control.
The following information will be displayed (if applicable):
❖
Current input (
ANT/CABLE
,
Video
, etc.)
❖
If ANT/CABLE is the current input, either “CABLE” (for
cable TV) or “ANT” (for over-the-air broadcasts).
❖
Channel number (if in
ANT/CABLE
mode)
NOTE
NOTE