– 8 –
Note:
If you watch black and white programmes when
the
Colour System
mode is set to
Auto
, colour
noise may appear on the screen. In this case
select the appropriate
Colour System
(For the
system of each country or region, refer to pages
9, 21).
Switching off the TV
1
Press
on the remote control or
!
on the
TV left side panel to switch to the standby
mode.
Notes:
• When the TV will not be used for a long period
of time, such as during vacation or travel,
remove the power plug from the wall outlet.
• The TV will automatically turn itself off after
approximately 15 minutes if it is tuned to a
vacant channel or a station that completes its
broadcast for the day. This function does not
work in external input or Blue screen Off mode.
The TV will automatically turn itself off after
approximately 2 hours if you do not operate
the TV after turned on by on timer function.
• If power is cut off while you are viewing the TV,
the Last Mode Memory function turns on the
TV automatically when power is applied again.
If power is going to be off for a long time and
you are going to be away from your TV, unplug
the power cord to prevent the TV from turning
on in your absence.
Tuning the TV for the fi rst time
Before switching on the TV, put your decoder
and media recorder to standby, if they are
connected, and ensure that the aerial is
connected. To setup the TV, use the buttons on
the remote control as detailed on page 9.
1
Press the
button. The
Quick Setup
screen will appear. This screen will appear
the fi rst time that the TV is switched on.
Quick Setup
Language
English
2
Press
or
to select the menu language
(English, Chinese (CS), Malay, Thai, Vietnamese,
Russian, Arabic, Persian or French).
3
Press
Q
, to display the
Location
menu.
Press
or
to select
Store
or
Home
. For
normal home use, select
Home
.
You can select either
Home
or
Store
mode.
Home
is recommended for normal home
use. Select
Store
when using a TV for
displaying in a shop, etc.
Notes:
• Some PC models cannot be connected to this TV.
• If connecting a certain PC model that signal is
particular, the PC signal may not be detected
correctly.
• There is no need to use an adapter for
computers with DOS/V compatible mini D-sub
15 pin terminal.
• A bar may appear in the upper, lower, right or
left side of the screen, or parts of the picture
may be obscured depending on some signals.
This is not the malfunction.
• If the edges of the picture are stretched,
readjust the picture position adjustments in the
PC Settings
menu.
• Depending on the specifi cation of the PC you
are playing the DVD-Video on, and the DVD’s
title, some scenes may be skipped, or you may
not be able to pause during multi-angle scenes.
Signal names for mini D-sub 15 pin connector
Pin assignment for RGB/PC terminal
Pin No.
Signal name
Pin No.
Signal name
1
R
9
NC
2
G
10
Ground
3
B
11
NC
4
NC (not
connected)
12
NC
5
NC
13
H-sync
6
Ground
14
V-sync
7
Ground
15
NC
8
Ground
• Most of the picture/sound controls and
functions are available. However features not
available will be greyed out.
Turning the TV on
Switching on the TV
Connect the power cord to a wall outlet, the
!
power indicator lights in red (standby mode).
1
Press
on the remote control or
!
on the
TV left side panel, the
!
power indicator
lights in green.
2432PB2Series̲En.indd 8
2432PB2Series̲En.indd 8
2011/09/28 9:40:31
2011/09/28 9:40:31
