English
- 24 -
DVD Mode
(Limited Models Only)
Safety Information
CAUTION
DVD Player is a class 1 laser product. However
this product uses a visible laser beam which could
cause hazardous radiation exposure. Be sure to
operate the player correctly as instructed.
CLASS 1
LASER PRODUCT
RISK OF ELECTRIC SHOCK
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the
user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock of persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
Notes on Discs
On handling discs
•
To keep the disc clean, handle the disc by its
edge. Do not touch the surface.
•
Do not stick paper or tape on the disc.
•
If the disc is contaminated with any substance
like glue remove before using it.
•
Do not expose the disc to direct sunlight or heat
sources such as hot air ducts, or leave it in a
car parked in direct sunlight as the temperature
can rise quickly and damage the disc.
•
After playing, store the disc in its case.
On cleaning
•
Before playing, clean the disc with a cleaning
cloth. Wipe the disc from the center out.
•
Do not use solvents such as benzine, thinner,
commercially available cleaners or anti-static
spray intended for vinyl LPs.
Licence Notification
•
This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use
of this copyright protection technology must
be authorized by Rovi Corporation, and is
intended for home and other limited viewing
uses only unless otherwise authorized by
Rovi Corporation. Reverse engineering and
disassembly are prohibited.
How to Watch a DVD
When placing a disc into the loader, labelled side
of the disc should be on the front.
When TV set is turned on, first switch to DVD
source by using the
Source
button on the remote
control. Press play on the remote control, or
directly press play button on the side panel. If
there is no disc inside the loader, place a DVD
first and press play.
Note:
If you switch to another source by pressing
Source
,
Swap
or
Programme
+/-
buttons on the
remote control, DVD playback will be paused
automatically. You should press
Play
button and
resume the playback manually when you switch
to DVD mode.
DVD Control Panel Buttons
/
(
Play / Pause)
Plays/pauses the disc. When DVD menu (root
menu) is active, this button functions as “button
select” (selects the highlighted item in menu) if
this is not prohibited by the disc.
/
(
Stop / Eject)
Stop playing disc / Eject or Load the disc.
Note:
•
You cannot eject the disc via the remote control.
• While playing a file, you should press
STOP
button three times to eject.
