English
- 13 -
next. You can edit the channel list according to
your preferences or press the
Menu
button to
quit and watch TV.
While the search continues a message may
appear, asking whether you want to sort channels
according to the LCN
(*)
. Select
Yes
and press
OK
to confirm
.
(*)
LCN is the Logical Channel Number system that
organizes available broadcasts in accordance with a
recognizable channel number sequence (if available).
Note:
Do not turn off the TV while initializing first time
installation. Note that, some options may not be available
depending on the country selection.
Using SatcoDX Feature
(**)
You can perform SatcoDX operations using the
Installation>Satellite Settings
menu. In the
SatcoDX
menu, there are two options regarding
to the SatcoDX.
You can download or upload SatcoDX data. In
order to perform these functions a USB device
must be connected to the TV.
You can upload current services and related
satellites & transponders in TV, to a USB device.
Additionally you can download one of the
SatcoDx files stored in USB device, to the TV.
When you select one of these files, all services
and related satellites and transponders in the
selected file will be stored in the TV. If there are
any installed terrestrial, cable and/or analog
services, they will be kept and only satellite
services will be removed.
Afterwards, check your antenna settings and
make changes if necessary. An error message
stating “
No Signal
” may be displayed if the
antenna settings are not configured properly.
(**)
Limited Models Only
Media Playback via USB Input
You can connect 2.5” and 3.5” inch (hdd with external
power supply) external hard disk drives or USB memory
stick to your TV by using the USB inputs of the TV.
IMPORTANT!
Back up the files on your storage
devices before connecting them to the TV.
Manufacturer will not be responsible for any
file damage or data loss. Certain types of USB
devices (e.g. MP3 Players) or USB hard disk
drives/memory sticks may not be compatible
with this TV. The TV supports FAT32 and NTFS
disk formatting.
Wait a little while before each plugging and
unplugging as the player may still be reading files
. Failure to do so may cause physical damage to
the USB player and the USB device itself. Do not
pull out your drive while playing a file.
You can use USB hubs with your TV’s USB
inputs. External power supplied USB hubs are
recommended in such a case.
It is recommended to use the TV’s USB input(s)
directly, if you are going to connect a USB hard
disk.
Note:
When viewing image files the
Media Browser
menu can only display 1000 image files stored on the
connected USB device.
Media Browser Menu
You can play photo, music, and movie files
stored on a USB disk by connecting it to your
TV. Connect a USB disk to one of the USB inputs
located on the side of the TV. Pressing the
Menu
button while in the
Media Browser
mode will
access the
Picture
,
Sound
and
Settings
menu
options. Pressing the
Menu
button again will
exit from this screen.
You can set your
Media
Browser
preferences by using the
Settings
Menu.
Loop/Shuffle Mode Operation
Start playback with the
Play
button and activate
All files in the list will be
continuously played in original
order
Start playback with the
OK
button and activate
The same file will be played
continuously (repeat)
Start playback with the
Play
button and activate
All files in the list will be
played once in random order
Start playback with the
Play
button and activate
,
All files in the list will be
continuously played in the
same random order.
