English
- 17 -
English
Manual Tuning, Analogue Fine Tuning
The television can be tuned-in manually using Manual Search feature.
Digital Aerial Manual Search
The feature is available for service engineers or
can be used for direct channel entry if the multiplex
channel is known.
•
Select
Manual channel scan
from the
Install and
Retune
menu
and press
OK.
After selecting search type as
Digital Aerial
, you
can enter the multiplex or frequency number using
the numeric buttons and press
OK
button to search.
•
Enter the multiplex number using the numeric
buttons. The television will automatically search
for that multiplex. When the multiplex is found any
channels not currently on the programme list will be
added and the programme information at the top of
the screen will be updated.
•
Repeat as necessary.
Digital Cable Manual Search
•
In cable manual scan, you can enter frequency,
modulation, symbol rate and network channel scan
options. After selecting search type as
Digital Cable
,
you can set the desired options and press
OK
button
to search.
Analogue Manual Search
Only if an analogue signal or Service is available.
The television can be tuned-in manually. For example:
if the television cannot be connected to a media
recorder/decoder with a SCART lead or to tune-in a
station on another System.
To allocate a programme position on the television
for a decoder and media recorder: turn the decoder
on, insert a pre-recorded film into the media recorder
and press
PLAY
, then manually tune.
After selecting search type as
Analogue
, you can
use
Up
or
Down
button to highlight an item and then
press
Left
or
Right
button to set an option.
Enter the channel number or frequency using the
numeric buttons. You can then press
OK
button
to search. When the channel is located, any new
channels that are not on the list will be stored.
Analogue Fine Tune
Only if an analogue signal or Service is available.
•
Select
Analogue Fine Tune
from the
Install and
Retune
menu by using
Up
or
Down
and
OK
buttons. Analogue fine tune screen will be displayed.
Analogue Fine Tune feature will not be available if
there are no analogue channels stored.
•
Use
Left
or
Right
button to set Fine Tune. When
finished, press
OK
button.
Clear Service List (*)
(*) This setting is visible only when the Country option
is set to Denmark, Sweden, Norway or Finland.
•
Select
Clear Service List
from the
Install and
Retune
menu by using
Up
or
Down
and
OK
buttons.
A confirmation message will be displayed. If you
want to delete all channels, select
Yes
and press
OK.
Use this setting to clear channels stored.