September 1997 © TOSHIBA CORP.
1 - 27
2460 ADJUSTMENT
4
0
1
1
1.5.2
Printer unit adjustment
a) Polygonal motor 600 dpi/GDI (Primary scanning reproduction ratio of the printer unit)
(1) Make a test print as in the following procedure.
(3) In order to set the distance “A” to 100 mm, adjust as follows.
1
FAX
START
Set the value
INT
Print movement direction
PWR
15
5
A
1
1
FAX
(2) Measure the distance “A” which is the distance between the 5th line and 15th line from the
bottom end of the test print paper against the direction of the paper movement.
0
5
1
Notes 1. An increase in the value lengthen the distance “A”.
2. In order to make a test print, make sure the message indicates [ 100 %
A ]
after the INT key is pressed.
3. Adjustment value is effective within the range of 114 ~ 142.
The default adjustment value is 128.
