Toshiba 20V300P, Owner'S Manual

Page: 8 / 148

English
88
Connecting a computer
Before connecting any external equipment, turn off all main power switches. If there is no switch
remove the mains plug from the wall socket.
A band may appear at the edges of the screen or parts
of the picture may be obscured. This is due to the
scaling of the picture by the set, it is not a malfunction.
When PC input mode is selected some of the
television’s features will be unavailable e.g.
Manual
setting in the SET UP menu, Colour , Tint and DNR in
the Picture settings menu.
Signal information for Mini D-sub 15 pin connector
Pin assignment
for RGB/PC
terminal
Pin. No. Signal name Pin No. Signal name
1 R 9 NC
2 G 10 Ground
3 B 11 NC
4 NC (not connected) 12 NC
5 NC 13 H-sync
6 Ground 14 V-sync
7 Ground 15 NC
8 Ground
the back of your television
Computer
Audio cable for PC to
television connection
(not supplied)
Conversion adaptor if required (not supplied)
RGB PC cable (not supplied)
Mini D-sub 15 pin
connector
Connect the PC cable from the computer to the PC
terminal on the back of the television.
Connect the audio cable to the PC Audio socket on the
back of the television.
Press the B to select PC mode.
The following signals can be displayed:
VGA: 640 x 480/60 Hz (VESA)
SVGA: 800 x 600/60 Hz (VESA)
XGA: 1024 x 768/60 Hz (VESA)
IMPORTANT NOTE: For the best PC picture it is
recommended that the PC source is set to
SVGA: 60Hz format. Other signal formats may not
display correctly.
PLEASE NOTE:
Some PC models cannot be connected to this
television.
An adaptor is not needed for computers with a DOS/V
compatible mini D-sub 15 pin terminal.
If the picture edges are stretched use Picture Position
(see “PC Settings” section) .
It is possible that during DVD playback some scenes
may be skipped and the pause function on multi media
angle scenes may not work. This is dependent on the
specifications of the PC.
g p g