Toshiba 20V300P, Owner'S Manual

Page: 12 / 148

English
12
To select a programme position use the numbered
buttons on the remote control.
Programme positions can also be selected using P
f
and
P
e
.
To revert to the previous programme position press
^ ^
.
To display on-screen information i.e. programme position,
input mode or stereo/mono signal, press CALL . Press
again to cancel.
Selecting programme positions
Programme skip, general controls,
time display, stereo/bilingual transmissions
3
4
5
Use up or down to highlight the programme
position to be skipped and press OK to select.
Press right to select Programme skip .
To prevent certain programmes from being viewed, the
programme position can be skipped. The remote control
must be removed as the channels will still be available using
the number buttons. Programmes can then be watched as
normal using the controls on the television, but the television
will not show the skipped programme position.
Programme skip
Select Manual tuning from the SET UP menu,
press OK .
1
2
Use up or down to turn Programme skip on.
Press OK .
on the screen indicates a skipped
programme position.
Each programme position has to be individually
selected. To turn Programme skip off, repeat the
procedure for each position.
Skipped programme positions cannot be selected
by P
f
and P
e
or by the controls on the
television, but can still be accessed by the number
buttons on the remote control.
M a n u a l t u n i n g
Pr o g r a m m e
0 1 I A C 2 2 0
O K
S t o r e
M E N U B a c k E X I T Wa t c h T V
M a n u a l t u n i n g
Pr o g r a m m e s k i p : O n
0 1 I A C 2 2 0
O K
S t o r e
M E N U B a c k E X I T Wa t c h T V
If stereo or dual language broadcasts are transmitted the
word Stereo or Dual will appear on the screen each time
programme positions are changed, disappearing after a
few seconds. If the broadcast is not in stereo the word
Mono will appear.
Stereo… Press
O
I/II
to select Stereo
O
or Mono .
Bilingual… Bilingual transmissions are rare. If they are
transmitted the word Dual will display. Choose the
required programme number and if the word Dual
appears press
O
I/II
to select Dual 1 , Dual 2 or
Mono .
Stereo and Bilingual transmissions
The time display facility allows the current (text service)
time to be seen on the television screen.
Press
8
/
9
whilst watching a normal television
broadcast to see a time display from the broadcaster. It
will remain on screen for about 5 seconds.
The Time Display
g p g