Toshiba 20V300P, Owner'S Manual

Page: 21 / 148

English
21
Press
6
/ /
7
to display text. Press again to
superimpose the text over a normal broadcast picture.
Press again to return to normal television viewing.
Programmes cannot be changed until this has been done.
To display a page of text:
6
/ /
7
For use with the RED and GREEN buttons to view
sub-pages when available.
To access sub-pages: X
Press to switch between Auto and LIST mode while
viewing a text page.
Text services
continued
– LIST mode, control buttons
Below is a guide to the functions of the remote control text buttons.
Enter the page number then press
8
/
9
, a normal
picture will be displayed. The television will indicate when
the page is present by displaying the page number at the
top of the screen. Press
6
/ /
7
to view the page.
To display news flashes:
Select the news flash page for the chosen text service
(see the index page of text service). Press
8
/
9
. The
news flashes will be displayed as and when they are
broadcast. Press
8
/
9 again to cancel the display.
The news flash page must be cancelled before
changing programmes.
To switch between Auto and LIST
Press T to access the index/initial page. The one
displayed is dependant on the broadcaster.
To display the index/initial page: T
At times it is convenient to hold a page of text. Press q
and q will appear in the top left of the screen. The
page will be held on screen until the button is pressed
again.
To hold a wanted page: q
To discover the solutions on quiz and joke pages press the
r
button.
To reveal concealed text: r
To select a page whilst viewing a
normal picture:
8
/
9
Press
s
once to enlarge the top half of the page, press
again to enlarge the bottom half of the page. Press again
to revert to normal size.
To enlarge the text display size: s
Remember to cancel te
xt before
changing channels – press the
6 / /
7 button twice.
The four coloured choices at the bottom of the screen are
numbers – 100, 200, 300 and 400, which have been
programmed into the television’s memory. To view these
pages press the relevant coloured buttons.
To change these stored pages press the relevant coloured
button and enter the 3 digit number. This number will
change in the top left of the screen and in the coloured
highlight.
Press OK to store. The bars at the bottom of the screen
will flash white. Whenever OK is pressed all four
page numbers showing at the bottom will be stored
and the previous ones will be lost.
If OK is not pressed the selection will be forgotten when
text is cancelled.
Other pages may be viewed by entering the 3 digit page
number – but DO NOT press
OK or these pages will be
stored.
Navigating pages using LIST
g p g