34
Chapter 6: Using the TV’s features
Input labeling example:
The screen below is an example of how you could
label the inputs if you connected a VCR to Video,
a Video Recorder to HDMI 1, and a DTV set-top
box to HDMI 2. Also note that the ColorStream
HD input is labeled “Hidden”, which means that
input will be skipped over when
is pressed.
To clear the input labels:
Tuning channels
Setting the Channel Tuning Mode
This feature allows you to choose how tuning will
be handled for analog and digital channels when
the TV is in Antenna mode.
Note:
To use this feature, the
Input
Configuration
must be set to
Antenna
(
Page 28).
The channel tuning mode has three options.
Note:
Even if the
Channel Tuning Mode
is
set to
Digital
, analog channel 3 will still be the
default channel to prevent the initial case
where no digital channels have been found in
prior channel scans.
Tuning to the next programmed
channel
To tune to the next programmed channel:
Press
or
on the remote control or
PLAY/
CHANNEL
or
STOP/CHANNEL
on the
TV control panel.
Note:
This feature will not work unless you
program channels into the TV’s channel
memory (
Page 29).
1
From the
Preferences
menu, press
or
to select
Input Labeling
and then press
.
2
Highlight
Reset
and then press
.
Mode
Description
Standard
Both analog and digital channels can
be tuned normally.
Auto
(Default)
Digital channels will have priority
when manually entering a channel
number using the Channel Number
buttons (0-9) on the remote control,
analog channels can still be tuned by
or
, if available.
Digital
Only digital channels can be tuned.
1
From the
Setup
menu, press
or
to
select
Installation
and then press
.
2
Press
or
to highlight
Terrestrial
, and
then press
or
to select
Channel
Tuning Mode
.
3
Press
or
to select your desired mode.
