Revision 8 Sept 17
Sensor Technology 2017
Page 1
TSE3168V
TorqView5 Software
TorqView, version 5, can be installed as a Demo (if a full program has not yet been
purchased) and as a Full purchased program. The demo program allows for 10 hours use
and all functions are available except the save to file function.
If TorqView was purchased with the transducer, the transducer will be enabled to run
TorqView. If TorqView was purchased at a later date then an activation key is required to
convert the program from Demo to Full. The factory will send the activation key and details of
how to convert are on the About Screen towards the end of this manual.
Recommended minimum system requirements
Sensor Technology recommends a PC running Windows 10/8/7 with a minimum of 1GB of
RAM; a minimum screen resolution of 1024 x 768 pixels; a Pentium 4 or equivalent
processor; and a minimum of 650 MB free disk space.
Installing TorqView
Step 1: Insert the TorqView USB flash drive into an available USB port.
Step 2: Navigate to Computer and select the TORQVIEW USB device:
Step 3: Double click on AutoRun.exe
Step 4:
Click on the ‘Install’ button opposite TorqView.
Step 5: Follow the guidance.
Step 6: On completion TorqView is ready to run.
The default install directory is: C:\Program Files(x86)\Sensor Technology\Torqview
5\Torqview5.exe
Running TorqView
To avoid any communication errors it is advised that all torque transducer cables and leads
are correctly plugged in and the instrument is turned on before running TorqView.
TorqView can be run from:-
“Start”/”Windows” button, then “Programs”/”All apps” > “Sensor
Technology” > “TorqView 5”.
CAUTION
If planning to use a USB connection please either install Transducer Control 5 or
run the driver installer program before running TorqView 5.
Summary of Contents for ORT230-C
Page 30: ......
Page 31: ...Transducer Control 5 User Manual Revision 5 December 2016...
