Transducer Control 5 User Manual (RWT3746IM)
Revision 5, December 2016 - Page 20
when the current torque value drops below the “Reset Percentage” of the stored
peak value.
To configure the percentage, use the slider bar to select a value between 5% and
95%.
Update Transducer
The “Update Transducer” button will upload the settings to the Transducer.
Transducer Control will validate the settings before transmission to ensure that there
are no errors. If an error is detected an onscreen prompt will notify the user and
direct them to a resolution.
If all tests pass the validation check, a progress bar will be displayed to indicate the
progress of the settings upload, a message will be shown to indicate success or
failure.
Summary of Contents for ORT230-C
Page 30: ......
Page 31: ...Transducer Control 5 User Manual Revision 5 December 2016...
