Transducer Control 5 User Manual (RWT3746IM)
Revision 5, December 2016 - Page 9
Torque – Peak
Peak torque value captured since the last reboot or reset.
Torque – Auto Reset
Peak torque value captured since the last reboot or reset. Auto Reset mode
automatically resets the peak torque when the current torque drops below a
percentage of the peak value.
Torque – Peak CW
Peak torque value captured in the CW direction.
Torque – Peak CCW
Peak torque value captured in the CCW direction.
Torque – Min
Lowest numerical torque value captured.
Torque – Max
Highest numerical torque value captured.
Speed (Fast) / Speed (Slow)
Current speed value. The slow/fast descriptor refers to the method used to
capture speed.
Speed (Fast) – Peak / Speed (Slow) – Peak
Highest speed value captured since the last reboot or reset.
Speed – Rotations
Number of shaft rotations recorded from the fitted angle device or speed
pickoff.
Power (Fast) / Power (Slow)
Power is computed from the current torque and speed values captured. The
slow/fast descriptor refers to the method used to capture speed.
Power (Fast) – Peak / Power (Slow) – Peak
Highest power value captured since the last reboot or reset. Power is
calculated from every torque/speed pair captured, the highest value is stored.
Temperature – Shaft
Temperature captured from the shaft IR sensor.
Temperature – Internal
Temperature captured from the internal body sensor.
Summary of Contents for ORT230-C
Page 30: ......
Page 31: ...Transducer Control 5 User Manual Revision 5 December 2016...
