Torqeedo Hobie eVolve Owner'S Manual Download Page 27

27

Hobie Cat Company decides whether defective parts are repaired or 

replaced. Distributors and dealers who repair Torqeedo motors have no 

authority to make legally binding statements on behalf of Hobie Cat Com-

pany or Torqeedo.

Normal wear and tear and routine servicing are excluded from the war-

ranty.

This Warranty Does Not Cover

• Normal wear and discoloration

• Damage caused by abuse or failure to perform normal maintenance

• Damage caused by alterations or modifications

• Damage caused by hitting submerged objects or beaching without 

retracting the motor

• Transportation of parts to Hobie Cat Company or its dealers

• Any eVolve used as a rental or placed in commercial services of any kind

• Any other consequential damages, incidental damages, or incidental 

expenses, including damage to property

• Damage caused by failure to follow procedures outlined in this manual

• Damage caused by storing the motor in the water (ex. on a mooring)

• Previous services or repairs were not carried out by firms authorized by 

Torqeedo, or non-original parts were used

Some states do not allow the exculsion or limitation of incidental or con-

sequential damges, so the above limitations may not apply to you.

Implied Warranty

Any implied warranties, including implied warranty of merchantable and 

fitness for a particular purpose, shall be no longer than the duration of 

this express warranty.  Some states do not allow limitations on how long 

an implied warranty lasts, so the above limitations may not apply to you.

Hobie Cat Company makes no express warranties in addition to this Lim-

ited Warranty.  Hobie Cat dealers have no authority to make any warran-

ties on behalf of Hobie Cat Company in addition to or inconsistent with 

those stated herein.

To the extent any provision of this warranty is prohibited by Federal, 

State or Municipal law and cannot be preempted, it shall not be appli-

cable.  This warranty gives you specific legal rights.  You may have other 

rights, which vary from state to state.

Summary of Contents for Hobie eVolve





























Reviews: