![background image](http://html1.mh-extra.com/html/torq-comm/commander-xt1000/commander-xt1000_user-manual_1134498067.webp)
COMMANDER XT1000 / XT2000
User Manual
Rev 1.06
50 |
P a g e
COMMANDER XT2000 FUNCTIONALITY
The COMMANDER XT2000 delivers all of the that the COMMANDER XT1000 provides
plus the ability to adjust the pressure of the hydraulic or pneumatic pump from up to
40 feet away when fitted with a COMMANDER CONTROL MODULE.
This section will highlight only the unique features of the COMANNDER XT2000.
1.
Before using the Control Module, be sure the battery is fully charged by plugging the
Charging into the Charging Port. A fully charged battery will last approximately 1 week
of standard use.
2.
The three Status Lights on the
Control Module indicate unit’s oper
ation.
i.
The RED LED is lighted when the battery is low (20% capacity) or the Charger is
plugged in.
The Charger can be plugged in continuously for extended duty with no damage to the
battery or circuits.
ii.
The first BLUE LED is lighted when a Bluetooth pairing is established.
iii.
The second BLUE LED is flashing when there is Bluetooth communication exchange.
3.
If a signal from the COMMANDER has not been received within 1 hour, the devise will go into
a low power mode in order to extend battery life.
The Control Board is constantly looking for Bluetooth Communication and will wake
immediately when a paired device is detected. The BLUE LED will immediately start flashing.
4.
The COMMANDER XT2000 allows a User with Supervisor or higher privileges to adjust
the pump pressure. From the Home screen, tap
PRESSURE
to begin.