COMMANDER XT1000 / XT2000
User Manual
Rev 1.06
52 |
P a g e
7.
Prior to the start of subsequent passes, the operator will receive similar screens
informing them of the new target pressure. The Operator simply taps
ADJUST
to set the
pressure.
The Pump Pressure will be adjusted automatically.
NOTE: The pump needs to be at pressure and stabilized before the ADJUST button is
tapped. This provides the correct starting point for the pump adjustment and allows
the COMMANDER to calculate the direction and amount to adjust the pump pressure.
Not having the pump at pressure or stabilized may increase the time to complete the
adjustment.
Changing an XT2000 to an XT1000
The Commander XT2000 can be changed to act as a Commander XT1000. In this
configuration it will not be able to adjust the pressure of a pump retrofitted with a
Control Module.
From the Advanced Settings screen, simply tap the
ON/OFF
toggle switch to change the
Commander from an XT2000 to and XT1000 and back again.
Tap
SAVE
to retain the changes.
