Toro Z500 Series Z Master, Operator'S Manual

Page: 6 / 64

• Carefully release pressure from components
with stored energy.
• Disconnect battery or remove spark plug wire
before making any repairs. Disconnect the
negative terminal first and the positive last.
Reconnect positive first and negative last.
• Use care when checking blades. Wrap the
blade(s) or wear gloves, and use caution when
servicing them. Only replace blades. Never
straighten or weld them.
• Keep hands and feet away from moving parts.
If possible, do not make adjustments with the
engine running.
• Charge batteries in an open well ventilated
area, away from spark and flames. Unplug
charger before connecting or disconnecting
from battery. Wear protective clothing and use
insulated tools.
• Keep all parts in good working condition and
all hardware tightened. Replace all worn or
damaged decals.
• Use only Toro approved attachments.
Warranty may be voided if used with
unapproved attachments.
6