Blade Control Switch (PTO)
The blade control switch (PTO) is used to engage the
electric clutch and drive the mower blades. Pull the
switch up to engage the blades and release. To disengage
the blades, push the blade control switch (PTO) down
or move a motion control lever into the neutral lock
position.
Ignition Switch
This switch is used to start the mower engine and has
three positions:
Start, Run
and
Off
.
Motion Control Levers
The motion control levers are used to drive the machine
forward, reverse, and turn either direction.
Neutral Lock Position
The neutral lock position is used with the safety interlock
system to engage and to determine neutral position.
Fuel Shut-off Valve
Close the fuel shut-off valve (under the seat) when
transporting or storing the mower.
Attachments/Accessories
A selection of Toro approved attachments and
accessories are available for use with the machine to
enhance and expand its capabilities. Contact your
Authorized Service Dealer or Distributor or go to
www.Toro.com for a list of all approved attachments
and accessories.
Specifications
Note:
Specifications and design are subject to change
without notice.
Width:
48 inch Deck
52 inch Deck
Without Deck
45.7 inches (116.1
cm)
45.7 inches (116.1
cm)
Deflector Up
54 inches (137.2
cm)
57.5 inches (146.0
cm)
Deflector Down
63.55 inches (161.4
cm)
67.63 inches (171.8
cm)
60 inch Deck
Without Deck
53.0 inches (134.6
cm)
Deflector Up
61.73 inches (156.8
cm)
Deflector Down
75.67 inches (192.2
cm)
Length:
48 inch Deck
52 inch Deck
Roll Bar - Up
79.2 inches (201.2
cm)
79.2 inches (201.2
cm)
Roll Bar - Down
80.9 inches (205.5
cm)
80.9 inches (205.5
cm)
60 inch Deck
Roll Bar - Up
83.1 inches (211.1
cm)
Roll Bar - Down
84.8 inches (215.4
cm)
Height:
Roll Bar - Up
Roll Bar - Down
70.5 inches (179.1 cm)
46.8 inches (118.9 cm)
Weight:
48 inch Deck
52 inch Deck
60 inch Deck
29HP
Kawasaki
Units
NA
NA
1255 lb (569
kg)
13
