Figure 49
1.
Pull this tab out to the
side in the direction of the
arrow
3.
Pull the shroud off of this
frame tab in the direction
of the arrow
2.
Pull the shroud off of this
frame tab in the direction
of the arrow
4.
Shroud
4. Remove the spark plug.
G008803
Figure 50
5. Install the lefthand hydraulic unit shroud (Figure 49).
Checking the Spark Plug
Important:
Never clean the spark plug(s). Always
replace the spark plug(s) when it has: a black
coating, worn electrodes, an oily film, or cracks.
If you see light brown or gray on the insulator, the
engine is operating properly. A black coating on the
insulator usually means the air cleaner is dirty.
Set the gap to 0.030 inches (0.76 mm).
G008794
1
2
Figure 51
Installing the Spark Plug
Tighten the spark plug(s) to 16 ft.-lb (22 N-m).
Figure 52
37
