MOWER DECKS
6-13
Toro Z Master G3 3000/5000/6000 Series Service Manual
6
4. Pack the bearing with No. 2 grease and install the
bearing (Fig. 420).
6. Using a seal driver, drive or press the seal on the
lower end of the spindle housing until the seal is
flush with the outer edge of the housing (Fig. 422).
5. Install the lower seal (Fig. 421).
Note: The open lip of the seal should be facing
outward.
Fig. 419
DSCN-2690a
Fig. 420
DSCN-2691a
Fig. 421
DSCN-2692a
Fig. 422
DSCN-2693a
3. Turn the spindle housing over and install the lower
bearing race into the spindle housing (Fig. 419).
Note: The wider inside diameter of the bearing race
should be facing up to accept the tapered
bearing.
