HYDRAULIC SYSTEM
5-5
Toro Z Master G3 3000/5000/6000 Series Service Manual
5
18. Release the parking brake.
19. Remove the nut securing the brake swivel to the
brake caliper arm (Fig. 277).
21. Remove the caliper assembly from the wheel hub
(Fig. 279).
Fig. 277
PICT-8582a
20. Remove the 2 bolts and washers securing the brake
caliper to the UHT (Fig. 278).
Note: There is a spacer washer on each bolt be-
tween the caliper bracket and the UHT.
Fig. 278
PICT-8584
Fig. 279
PICT-8586a
22. Repeat steps 19 – 21 on the opposite side of the
machine.
23. On the side of the machine being serviced, use a
wheel hub puller (Toro part no. TOR6006) to remove
the wheel hub from the UHT wheel shaft (Fig. 280).
Fig. 280
PICT-8587a
