HYDRAULIC SYSTEM
5-28
Toro Z Master G3 3000/5000/6000 Series Service Manual
5
UHT Transmission Installation (2012 & later
models)
4. On the opposite side, ensure the cradle mounting
holes align with the mounting holes on the UHT
transmission (Fig. 357).
3. Lift the UHT transmission/cradle assembly up to the
frame with a floor jack. On the side of the machine
that was serviced, loosely install two mounting bolts,
coming from the top down, through the frame and
into the UHT transmission (Fig. 356).
Fig. 354
DSCN-4535a
Fig. 356
DSCN-4546a
Fig. 357
DSCN-4539a
1. Using the top two bolts as guides, position the UHT
transmission into the cradle and slide the unit onto
the two bolts (Fig. 354).
Note: Be careful not to damage the UHT transmis-
sion pulley. Make sure the release valve lever
is in the closed (horizontal) position.
2. Loosely install a nut onto each of the bolts securing
the UHT transmission to the cradle (Fig. 355).
Fig. 355
DSCN-4536a
