Toro TX 427 22342HD, Operator'S Manual

Page: 13 / 52

Traction Control
Figure 6
1. Reference bar (does not move to give you a reference point
and a fixed handle to hold while operating the traction unit)
2. Traction control (moves to control the machine)
•
To move forward, move the traction control forward
(
Figure 7 ).
Figure 7
•
To move rearward, move the traction control rearward
(
Figure 8 ). When reversing, look behind for
obstructions and keep your hands on the reference
bar.
Figure 8
•
To turn right, rotate the traction control clockwise ( Figure
9 ).
G008131
Figure 9
•
To turn left, rotate the traction control counterclockwise
(
Figure 10 ).
G008132
Figure 10
•
To stop, release the traction control ( Figure 6 ).
Note:
The farther you move the traction control in any
direction, the faster the machine moves in that direction.
Loader Arm/Attachment Tilt Lever
To tilt the attachment forward, slowly move the lever to the
right (
Figure 11 ).
To tilt the attachment rearward, slowly move the lever to the
left (
Figure 11 ).
To lower the loader arms, slowly move the lever forward
(
Figure 11 ).
To raise the loader arms, slowly move the lever rearward
(
Figure 11 ).
You can also push the lever fully forward into a detent
position (
Figure 11 ) to release the loader arms so that the
attachment rests on the ground. This allows attachments such
as the leveler and the hydraulic blade to follow the contours
of the ground (i.e., float) when grading.
13