Toro TM5490, Operator'S Manual

Page: 62 / 94

1.62 1.62 MAINTENANCE
Running In Period continued
Grease pivot points: Clean and grease all grease points with a good quality medium grade grease.
Replace any grease nipples which are damaged.
Grease all cutterhead grease points and ensure that sufficient grease is injected such that clean grease is seen
to escape from the roller end caps. This provides visible evidence that the roller seals have been purged of
grass and debris etc. and will ensure maximum working life.
2
4
1
3
5
Daily
Daily (if fitted)
50 Hour (weekly)
Note: This grease point is only applicable when
an overrun drawbar is fitted.
TM5490
Daily
Daily (if fitted)
50 Hour (weekly)
3
5
2
4
6
7 1
TM7490
Note:
This grease point is only applicable when
an overrun drawbar is fitted.