Toro TM5490, Operator'S Manual

Page: 18 / 94

1.18 1.18 INTRODUCTION
Introduction
This manual has been provided to ensure that safe operating practises and procedures are adhered to.
The Toro TM5490 and TM7490 Trailed Gang Mowers are fully independent hydraulically powered machines
suitable for tractors having a power range in excess of 33 kW (45 bhp). It is easily attached to the tractor ring-
hitch and powered from the rear 540rpm PTO. All cutterheads can be lowered into work from the tractor seat by
cable operated or electrically operated hydraulic valves (available as an optional extra) and will automatically shut
off when lifted.
Hydraulically operated brakes are fitted as standard and are designed to function in conjunction with the tractor
service brake system. An overrun braking system is available as an option and can be used if hydraulic services
are not available on the towing tractor.
Toro cylinder mowers are precision built machines designed solely for all weather cutting, a high standard of fin -
ish and long life within the limitations stated in this manual. Use in any other way is considered as contrary to the
intended use. Compliance with and strict adherence to the conditions of operation, service and repair as specified
in this Operators Manual also constitute essential elements of the intended use. The way in which this machine is
operated and maintained will have a profound effect on its performance and reliability.
This manual contains advice on the TM5490 and TM7490 Trailed Gang Mowers which should be operated, ser-
viced and repaired only by persons who are familiar with their particular characteristics and who are acquainted
with the relevant safety procedures.
The safety precautions listed herein and all other generally recognised regulations on safety and all road traffic
regulations must be observed at all times.
Any unauthorised modifications carried out to this machine may relieve Toro of liability for any resulting damage
or injury.
In the pursuit of continuous product development Toro reserve the right to alter specifications without notice.
Cutterhead Variants: The Trailed Gang mowers can be fitted with a range of cutterhead configurations and
optional extras:
Cutterhead Cylinder diameter Number of blades Fixed Heads
Floating Heads with
smooth or grooved front
rollers
MK3 Cutterhead 200mm (8˝)
254mm (10˝)
4, 6, 8, 10
4, 6
Yes
Yes
Yes
No
Optional Extras:
Electric Lift Kit - Converts manual operated machine to electric lift.
Floating Cutting Unit Kit (TM5490 only) - Follows ground contours and provides an improved cut.
Overrun Drawbar Kit - Allows the machine to be used on a tractor without hydraulic brakes.
When fitting optional extra kits to the mower be sure to fix the serial number decal supplied with the kit. This will
help the spare parts department to supply the correct spare parts throughout the service life of the mower.
Left and right: Throughout this manual the terms ‘left’ and ‘right’ refer to the machine when looking in the
direction of forward travel.