Toro TM5490, Operator'S Manual

Page: 17 / 94

1.17 1.17 EC CONFORMITY INFORMATION
EC DECLARATION OF CONFORMITY
Manufactured by: HAYTER LIMITED,
declare that the lawnmower :
Model name:
Type:
Model No:
Cutting width:
Speed of rotation of the
cutting device:
Complies with the provisions of Directive: 2004/42/EC Essential Health & Safety Requirements relating to the Design &
Construction of Machinery and Safety Components and the regulations transposed into national law.
Also Directive 2004/108/EC Electromagnetic Compatibility and the regulations transposed into national law.
Authorised Signatory:
S.A Maryniak
(Technical Director)
Declaration done and technical documentation kept at:
HAYTER LIMITED
Spellbrook, Bishop’s Stortford,
Herts. CM23 4BU ENGLAND
Date: 12.04.10
Address: Spellbrook, Bishop s Stortford, Herts. CM23 4BU. ENGLAND
Serial No.
Mower
02700
350 cm
1000 rpm
TM7490
Mower
02701
478 cm
1000 rpm
Trailed Gang Trailed Gang
TM5490
Noise Levels
The operator ear noise level for the Toro Trailed Gang Mowers is approximately 87.5dB(A) Led.
The operator ear noise level stated above refers only to the noise level generated by the mowing equipment.
This measurement was taken outside the tractor cab at a point close to the rear screen and in line with the
operator ear position. The tractor noise was eliminated from the measurement by use of an acoustic screen.
This noise level figure is of limited use when assessing daily noise exposure levels for operators. Such assess -
ments will need to take into account the actual noise level at the operator ear position due to the tractor and
mower combination. This will be affected by a number of factors i.e. type or tractor, engine speed, whether a
cab is fitted, whether windows are open or closed, site conditions, etc.
EC Declaration of Conformity