Toro TITAN HD 1500, Operator'S Manual

Page: 69 / 88

Replacing the Hydraulic
Pump-Drive Belt
1. Park the machine on a level surface, disengage
the blade-control switch (PTO), and engage the
parking brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Remove the mower belt; refer to Replacing the
Mower Belt for Side-Discharge Mower Decks
(page 66)
or Replacing the Mower Belt for
Rear-Discharge Mower Decks (page 67) .
4. Raise the machine and support it with jack
stands (
Figure 102 ).
5. Remove the clutch stop ( Figure 101 ).
g036860
Figure 101
1. Clutch stop
6. Remove the idler spring from the post ( Figure
102 ).
7. Remove the existing belt from the
hydraulic-pump-drive pulleys and the
engine pulley.
8. Install the new belt around the engine pulley and
the 2 hydraulic-pump pulleys (
Figure 102 ).
g036859
Figure 102
1. Idler pulley 4. Pump-drive belt
2. Idler-spring post 5. Right hydraulic-pump
pulley
3. Engine pulley
6. Left hydraulic-pump pulley
9. Install the clutch stop ( Figure 101 ).
10. Install the mower belt; refer to Belt Maintenance
(page 66) .
69