Fuel Window
The fuel window located on the left hand side of the machine
can be used to verify the presence of gasoline in the tank
(
Figure 7
).
G014521
1
Figure 7
1.
Fuel presence window
Height-of-Cut Lever
The height of cut lever allows the operator to lower and
raise the deck from the seated position. When the lever is
moved up, toward the operator the deck is raised from the
ground and when moved down, away from the operator it is
lowered toward the ground. Only adjust the height of cut
while machine is not moving (
Figure 4
).
Operation
Note:
Determine the left and right sides of the machine
from the normal operating position.
Think Safety First
Operating Safety
Please carefully read all of the safety instructions and decals
in the safety section. Knowing this information could help
you, your family, pets or bystanders avoid injury.
DANGER
Mowing on wet grass or steep slopes can cause
sliding and loss of control.
Wheels dropping over edges can cause rollovers,
which may result in serious injury, death or
drowning.
A loss of traction is a loss of steering control.
To avoid loss of control and possibility of rollover:
•
Do not mow near drop-offs or near water.
•
Do not mow slopes greater than 15 degrees.
•
Reduce speed and use extreme caution on
slopes.
•
When mowing slopes, gradually work from
lower to higher areas on the incline.
•
Avoid sudden turns or rapid speed changes.
•
Turn up, into an incline when changing
directions on slopes. Turning down the slope
reduces traction.
•
Attachments change the handling characteristics
of the machine. Use extra caution when using
attachments with the machine.
13
Summary of Contents for TimeCutter SS 4200
Page 45: ...Schematics Electrical Diagram Rev A 45 ...
Page 46: ...Notes 46 ...
Page 47: ...Notes 47 ...
