22
1
2
3
4
5
m–5201
Figure 21
1.
Gage Wheel
2.
Stud
3.
Washer
4.
Nut
5.
Wheel nut and washer.
Do Not Remove.
Adjusting Center Gage Wheels
The gage wheels must be adjusted in the proper hole
location for each height-of-cut position.
1. After adjusting height-of-cut remove bolt, washers and
nut (Fig. 22).
2. Select a hole position so the gage wheels are a
minimum of 3/8 in. (10 mm) off the ground for the
height-of-cut to be used (Fig. 22).
3. Reinstall the bolt, washers and nut (Fig. 22).
1
2
3
m–5200
4
4
Figure 22
1.
Center Gage Wheels and
Spacer
2.
Nut
3.
Bolt
4.
Washer
Summary of Contents for ProLine 30259
