1
Connecting the Battery
Parts needed for this procedure:
A/R
Petroleum jelly (not supplied)
Procedure
1.
Remove the clips securing the battery cover to the
battery box (Figure 4). Remove the cover from the box.
G02071 1
1
2
3
Figure 4
1.
Battery box
3.
Battery clips
2.
Battery cover
WARNING
Battery terminals or metal tools could short
against metal processor components causing
sparks. Sparks can cause the battery gasses to
explode, resulting in personal injury.
•
When removing or installing the battery,
do not allow the battery terminals to touch
any metal parts of the machine.
•
Do not allow metal tools to short between
try terminals and metal parts of the
machine.
2.
Attach the positive cable (red cable) to the positive (+)
terminal (Figure 5).
WARNING
Incorrect battery cable routing could damage
the blower and cables causing sparks. Sparks
can cause the battery gasses to explode,
resulting in personal injury.
•
Always disconnect the negative (black)
battery cable before disconnecting the
positive (red) cable.
•
Always connect the positive (red) battery
cable before connecting the negative
(black) cable.
G020712
1
2
3
4
5
Figure 5
1.
Battery box
4.
Battery clips
2.
Negative battery post
5.
Positive battery post
3.
Battery cover
3.
Attach the negative cable (black cable) to the negative
(-) terminal of the battery (Figure 5).
4.
Coat the terminals and mounting fasteners with
petroleum jelly to prevent corrosion.
5.
Install the battery cover and secure with the clips.
9
Summary of Contents for ProForce 44539
Page 30: ...Notes 30...
Page 31: ...Notes 31...