Toro Pro Sweep 5200, Service Manual

Page: 8 / 77

Jacking Instructions
CAUTION
chine. If the machine is not properly supported
move or fall, which may result in personal inju-
2
1
When changing tires or performing other ser-
vice, use correct blocks, hoists and jacks to
support sweeper. Make sure machine is parked
on a solid level surface such as a concrete floor.
Always chock or block wheels. Use jack stands
or solid wood blocks to support the raised ma-
by blocks or jack stands, the machine may
ry.
1. Position sweeper on a level surface with dump hop-
per empty and lowered. Have sweeper attached to tow-
ing vehicle, engage vehicle parking brake, stop engine
1. Wheel 2.
Figure 1
Frame jacking point
and remove key from the ignition switch. Chock sweep-
er wheels to prevent it from moving.
2. Position jack securely under the main sweeper
frame (Fig. 1). Do not use the axle as a jacking point.
3. Carefully jack machine off the ground.
4. Position jack stands or hardwood blocks under the
main frame to support the sweeper.
Safety
Page 1 – 4
Pro Sweep 5200