3.
Unscrew the oil fill cap and remove it.
4.
With the machine in the operating position,
carefully
pour oil into the crankcase. Wait 3 minutes for the oil
to settle and add enough to bring it to the point of
overflow. There should be very little, if any, oil left in
the bottle.
Note:
You may tip the machine forward (handle up)
to make adding oil easier. Remember to return the
machine to the operating position before checking the
oil level.
Important:
Do not tip the machine all the way
forward onto its nose, or fuel may leak out of the
machine.
5.
Screw the oil fill cap into the oil fill hole and tighten it
securely.
4
Adjusting the Control Cable
No Parts Required
Procedure
Refer to Adjusting the Control Cable (page 14).
Product Overview
1
2
G016243
Figure 10
1.
Discharge chute
7.
Electric-start button
(model 38452 only)
2.
Discharge chute handle
8.
Ignition key
3.
Fuel tank cap
9.
Choke lever
4.
Control bar
10.
Oil drain plug
5.
Recoil start handle
11.
Oil fill cap
6.
Primer
Operation
Note:
Determine the left and right sides of the machine
from the normal operating position.
DANGER
Gasoline is extremely flammable and explosive. A
fire or explosion from gasoline can burn you and
others.
•
To prevent a static charge from igniting the
gasoline, place the container and/or machine
on the ground before filling, not in a vehicle or
on an object.
•
Fill the tank outdoors when the engine is cold.
Wipe up spills.
•
Do not handle gasoline when smoking or around
an open flame or sparks.
•
Store gasoline in an approved fuel container, out
of the reach of children.
•
Do not tip the machine backward with fuel in
the fuel tank; otherwise, fuel may leak out of
the machine.
8
Summary of Contents for Power Clear 721 E 38742
Page 20: ...Notes 20 ...
Page 21: ...Notes 21 ...
