Note:
If you pull the recoil handle and feel no
resistance, the starter may be frozen. Thaw out the
starter before attempting to start the machine.
5.
While the engine is running, push in the choke lever
slowly.
6.
Unplug the extension cord from the power source and
the machine (model 38742 only).
CAUTION
If you leave the machine plugged into a power
source, someone can inadvertently start the
machine and injure people or damage property
(model 38742 only).
Unplug the power cord whenever you are not
starting the machine.
Engaging the Rotor Blades
To engage the rotor blades, hold the control bar against the
handle (Figure 19).
Figure 19
1.
Control bar
Disengaging the Rotor Blades
To disengage the rotor blades, release the control bar (Figure
20).
Figure 20
Stopping the Engine
To stop the engine, turn the ignition key counterclockwise to
the Off position (Figure 21).
Figure 21
Adjusting the Discharge Chute
To adjust the discharge chute, move the chute handle and the
chute deflector handle as shown (Figure 22).
11
Summary of Contents for Power Clear 721 E 38742
Page 20: ...Notes 20 ...
Page 21: ...Notes 21 ...
