Greasing the Boom Hinges
Service Interval:
Every 100 hours
Important:
If you wash the boom hinge with
water, clear all water and debris from the hinge
assembly and apply fresh grease.
Grease Type:
No. 2 lithium grease
1.
Wipe the grease fittings clean so that foreign
matter cannot be forced into the bearing or
bushing.
2.
Pump grease into the bearing or bushing at
each fitting
g002014
Figure 102
Right boom
1.
Grease fitting
3.
Wipe off excess grease.
4.
Repeat this procedure for each boom pivot.
Electrical System
Maintenance
Electrical System Safety
•
Disconnect the battery before repairing the
machine. Disconnect the negative terminal first
and the positive last. Connect the positive terminal
first and the negative last.
•
Charge the battery in an open, well-ventilated
area, away from sparks and flames. Unplug the
charger before connecting or disconnecting the
battery.
•
Wear protective clothing and use insulated tools.
Replacing the Fuses
The sprayer system fuse block is mounted to the end
of the fuse block for the vehicle. Replace an open
fuse with a fuse of the same type and amperage.
g362157
Figure 103
1.
7.5 A—TEC controller
(sprayer power and rinse
pump relay)
4.
7.5 A—TEC controller
(output)
2.
30 A—tank rinse
5.
10 A—switched power
3.
2 A—TEC controller (logic)
6.
15 A—sprayer boom
72
