operator’s seat. It allows you to start or stop the spray
operation. Press the switch to enable or disable the
spray system.
Left, Center, and Right Section
Switches
The left, center, and right section switches are located
on the control panel (
). Toggle each switch
forward to turn the corresponding section on and
rearward to turn them off. When the switch is turned
on, a light on the switch illuminates. These switches
affect the spray system only when the master section
switch is on.
Application-Rate Switch
The application-rate switch is located on the left
side of the control panel (
). Press and
hold the switch upward to increase the spray system
application rate, or press and hold it downward to
decrease application rate.
Boom-Section Lift Switches
The boom-section lift switches are located on the
control panel and are used to raise the outer boom
sections.
Sprayer-Mode Switch (HDX-Auto
Model)
Use the sprayer-mode switch to select between the
following spraying methods:
•
Use the manual mode when you want to manually
control the sprayer application rate.
•
Use the automatic mode when you want the
computer to control sprayer application rate with
setting you enter in the InfoCenter.
g028486
Figure 52
1.
InfoCenter console
3.
Automatic mode
(sprayer-mode switch
position)
2.
Sprayer-mode switch
4.
Manual mode
(sprayer-mode switch
position)
Regulating (Rate Control) Valve
The regulating valve located behind the tank (
), The regulating valve controls the amount of fluid
that is routed to the section valves or the rate return
to the tank.
g028483
Figure 53
1.
Regulating (rate control)
valve
4.
Flow meter
2.
Agitation valve
5.
Section valves
3.
Master-boom valve
36
