Restoring the Transmission Pump
1.
Chock the front wheels.
2.
Raise the platform forward; refer to
.
3.
Use an 8 mm (5/16 inch) hex key to rotate
the 2 socket head plugs for the transmission
pump-relief valves clockwise 3 turns (
).
g328252
Figure 36
1.
Socket head plugs (transmission pump-relief valves)
4.
Torque the 2 socket head plugs to 81 N∙m (59.7
ft-lb).
Restoring the Brakes
1.
Remove the bolt 12 x 40 mm and washer 12
mm from the hole at the center of the motor end
plate (
g014451
Figure 37
1.
Front wheel motor
3.
Washer 12 mm
2.
Hex plug
4.
Bolt 12 x 40 mm
2.
Install the hex plug into the motor end plate
(
).
g292377
Figure 38
1.
Hex plug
3.
Repeat steps
through
for the brake at the
other side of the machine.
4.
Remove the wheel chocks.
5.
Disconnect the tow bar.
Note:
The transmission and brakes are ready
for operation.
6.
Stow the 2 bolts 12 x 40 mm and 2 washers 12
mm stored in the platform support rails (
32
