g292377
Figure 33
1.
Hex plug
7.
Assemble a bolt 12 x 40 mm and washer 12
mm into the hole at the center of the motor end
plate (
g014451
Figure 34
1.
Front wheel motor
3.
Washer 12 mm
2.
Hex plug
4.
Bolt 12 x 40 mm
8.
Tighten the bolt in the threaded hole in
the brake piston until the brake releases
(
).
9.
Repeat steps
through
for the brake at the
left side of the machine.
Bypassing the Transmission
Pump
1.
Use an 8 mm (5/16 inch) hex key to rotate
the 2 socket head plugs for the transmission
pump-relief valves counterclockwise 3 full turns
(
).
Important:
You must manually steer the
machine while it is towed. When the engine
is shut off, there is no hydraulic steering
assist—steering the machine feels heavy.
g328252
Figure 35
1.
Socket head plugs (transmission pump-relief valves)
2.
Lower and latch the platform; refer to
the Platform (page 37)
.
3.
Remove the wheel chocks
Towing the Machine
Important:
Do not tow the machine faster than
3 to 5 km/h (2 to 3 mph) and for no longer than
3-minutes, otherwise internal damage to the
transmission may occur.
•
Use the front tow ring to tow the machine.
•
Tow the machine a short distance, at slow speed,
for no longer that 3-minutes.
31
