Toro Groundsmaster 3500 30807, Service Manual

Page: 68 / 283

Groundsmaster 3500 Hydraulic System Page 5 − 10
High Flow Hydraulic Filter Kit
The high flow hydraulic filter kit is designed with large
flow (40 GPM/150 LPM) and high pressure (5000
PSI/345 bar) capabilities. This kit provides for bi−direc-
tional filtration which prevents filtered debris from being
allowed back into the circuit regardless of flow direction.
If a component failure occurs in the closed loop traction
circuit, contamination from the failed part will remain in
the circuit until removed. When connecting hydraulic
test gauges in order to test traction circuit components
or after replacing a failed traction circuit component (e.g.
piston pump or wheel motor), the high flow hydraulic fil-
ter can be installed in the traction circuit. The filter will
ensure that contaminates are removed from the closed
loop and thus, do not cause additional component dam-
age.
Toro Part Number: TOR6011
NOTE: This kit does not include hoses (see Hydraulic
Hose Kit TOR6007 above).
NOTE: Replacement filter element is Toro part number
TOR6012. Filter element cannister tightening torque is
25 ft−lb (34 N−m).
Figure 12
O−Ring Kit
The O−ring kit includes O−rings in a variety of sizes for
face seal and port seal hydraulic connections. It is rec-
ommended that O−rings be replaced whenever a hy-
draulic connection is loosened.
Toro Part Number: 117−2727
Figure 13