Toro Groundsmaster 3500 30807, Service Manual

Page: 47 / 283

Groundsmaster 3500−G Page 4 − 9 Kubota Gasoline Engine
DANGER
Because gasoline is highly flammable, use cau-
tion when storing or handling it. Do not smoke
while filling the fuel tank. Do not fill fuel tank
while engine is running or hot, or when machine
is in an enclosed area. Always fill fuel tank out-
side and wipe up any spilled gasoline before
starting the engine. Store fuel in a clean, safety−
approved container and keep cap in place. Use
gasoline for the engine only; not for any other
purpose.
Fuel Tank Removal (Fig. 6)
1. Park machine on a level surface, lower cutting units,
stop engine, engage parking brake, and remove key
from the ignition switch. Unlatch and raise hood.
2. Remove fuel from the tank into a suitable container.
If necessary, remove crossover fuel hose to drain tank
completely.
3. Remove seat and seat support straps from the
frame. Note location of spacers under front of seat sup-
port straps. Disconnect seat switch from the electrical
harness.
4. Disconnect the fuel pump from the electrical har-
ness.
5. Remove fuel hose straps and three fuel hoses from
the fuel tank. Remove fuel tank from the machine.
Clean Fuel Tank
Clean the fuel tank every 2 years. Also, clean the fuel
tank if the fuel system becomes contaminated or if the
machine is to be stored for an extended period.
1. Remove fuel tank from the machine (see Fuel Tank
Removal).
2. Flush fuel tank out with clean gasoline. Make sure
tank is free of contaminates and debris.
3. Install fuel tank to the machine (see Fuel Tank Instal-
lation).
Fuel Tank Installation (Fig. 6)
1. Position fuel tank to the machine.
2. Connect three fuel hoses to the tank and secure with
hose clamps. Apply anti−seize lubricant to inserts on top
of tank and install fuel hose straps.
3. Connect fuel pump to electrical harness.
4. Connect seat switch to the electrical harness. Route
seat switch wire under seat support strap. Secure seat
support straps and seat to the frame with hex flange
head screws.
5. Check for correct seat operation and that seat switch
wires and connector are not pinched and do not contact
any moving parts.
6. Install crossover fuel hose if removed and fill fuel
tank.
Safety
Product Records
Kubota
Gasoline Engine
Hydraulic
Electrical
Wheels, Brakes,