Disassembling the Reel Clutch Shaft (continued)
2. Press the ball bearing (item 24 in
) from the end of the reel clutch
shaft. Discard the bearing that was removed.
3. Carefully remove the retaining ring (item 23 in
) that secures the
reel brake disc to the reel drive hub.
Note:
Do not damage the brake disc friction material when removing the
retaining ring.
4. Remove the reel brake disc from the reel drive hub, note the orientation of
the disc for assembly purposes. The friction material side of the disc needs
to be positioned toward the reel brake ring (item 2 in
) which is
pressed into the transmission housing.
5. Slide the reel clutch hub (item 20 in
) and reel clutch fork assembly
from the reel drive hub. For assembly purposes, note the correct orientation
of the indicator mark on the fork. If necessary, remove the pivot pins and
separate the fork from the hub.
g205734
Figure 50
1.
Hub flat location
4.
Ball bearing
7.
Flat washer
2.
Reel clutch shaft
5.
Flocked bearing seal
8.
Retaining ring
3.
Bearing collar
6.
Wave spring
6. Use a modified socket (refer to
Special Tools (page 4–7)
) to remove the
bearing collar assembly from the clutch shaft (
).
IMPORTANT
To prevent damage, avoid using excessive clamping pressure on
the reel clutch shaft assembly.
A. Use the flats on the reel drive hub to carefully secure the reel clutch shaft
assembly in a vise. Use a vise with soft jaws to prevent damage to the
clutch shaft assembly components.
B. Slide the modified socket over the bearing collar. Align the modified
socket so that the 5/32 inch pin can be inserted through the socket and
hole in the bearing collar.
C. Use a modified socket and socket wrench to remove the bearing collar
assembly from the clutch shaft.
7. Remove the retaining ring (item 9 in
), flat washer, wave spring, and
flocked bearing shield from the bearing collar. For assembly purposes, note
the orientation of the flocked bearing shield.
8. Press the ball bearing (item 7 in
) from the bearing collar. Discard
the bearing that was removed.
9. Slide the reel clutch pulley assembly and reel drive hub from the clutch shaft.
Greensmaster
®
eFlex 1800, 2100 and 2120
Page 4–45
Traction and Reel Drive System: Service and Repairs
12189SL Rev E
