Toro Greens Aerator, Service Manual

Page: 118 / 130

12.Install traction drive belt to engine pulley (see Trac-
tion Drive Belt Installation in Service and Repairs sec-
tion of Chapter 7 – Drive Train).
13.Install exhaust muffler guard (see Exhaust System
Installation in Service and Repair section of Chapter 3
– Engine).
IMPORTANT: When installing coring head chain,
make sure that alignment pins are used to properly
time the crank arm assemblies.
14.Install coring head chain (see Coring Head Chain
Installation in this section).
15.After assembly, rotate coring crankshaft by hand to
make sure that no binding occurs.
16.Install coring head cover.
17.Lower coring head lock–up brackets before machine
use.
18.Check and adjust coring head drive belt tension (see
Operator’s Manual).
Coring Head Page 8 – 12 Greens Aerator