Toro 88713, Operator'S Manual

Page: 13 / 52

Operation
Starting the Attachment
1. Ensure that the vents on the attachment, power
head, and battery are clear of any dust and
debris.
2. Align the cavity in the battery pack with the
tongue on the handle housing (
Figure 7 ).
g357444
Figure 7
3. Push the battery pack into the handle until the
battery locks into the latch.
4. To start the attachment, press the lockout button,
then squeeze the run trigger (
Figure 8 ).
Note:
Slide the variable-speed switch to
change the speed of the attachment.
g357456
Figure 8
1. Lockout button 3. Run trigger
2. Variable-speed switch
Rotating the Hedge Trimmer
Head
The hedge trimmer head can rotate 90° for different
cutting situations.
1. Remove the battery pack; refer to Removing the
Battery Pack from the Power Head (page 12) .
2. Press the release trigger and the adjusting lever
toward each other and rotate the hedge trimmer
head.
3. Release the lever and the trigger, and ensure
that the hedge trimmer head and adjusting lever
lock into place.
g363855
Figure 9
1. Release trigger 2. Adjusting lever
11