Toro 88713, Operator'S Manual

Page: 15 / 52

Maintenance
Remove the battery pack before maintenance or
cleaning work.
Use only the manufacturer’s recommended
replacement parts and accessories.
Inspect and maintain the product regularly. Have
the product repaired only by an Authorized Service
Dealer.
Greasing the Hedge
Trimmer
Service Interval: Every 10 hours
Grease Type: Lithium–based grease.
1. Place the hedge trimmer on a flat surface and
remove the battery pack; refer to
Removing the
Battery Pack from the Power Head (page 12) .
2. Clean the grease fittings with a rag ( Figure 11 ).
3. Connect a grease gun to each of the fittings and
pump grease into the fittings until grease flows
out from the fittings.
4. Wipe up any excess grease.
g363854
Figure 11
1. Grease fitting locations
Storage
Important:
Store the tool, battery pack, and
charger only in temperatures that are within the
appropriate range; refer to
Specifications (page
10) .
Important:
If you are storing the battery pack
for the off-season, charge it until 2 or 3 LED
indicators turn green on the battery. Do not store
a fully charged or fully depleted battery. When you
are ready to use the tool again, charge the battery
pack until the left indicator light turns green on
the charger or all 4 LED indicators turn green on
the battery.
•
Disconnect the product from the power supply
(i.e., remove the plug from the power supply or the
battery pack) and check for damage after use.
•
Clean all foreign material from the product.
•
Do not store the tool with the battery pack installed.
•
When not in use, store the tool, battery pack, and
battery charger out of the reach of children.
•
Keep the tool, battery pack, and battery charger
away from corrosive agents, such as garden
chemicals and de-icing salts.
•
To reduce the risk of serious personal injury, do
not store the battery pack outside or in vehicles.
•
Store the tool, battery pack, and battery charger
in an enclosed clean, dry area.
13