Set the parking brake when you leave the machine; refer
to Setting the Parking Brake in Operation. Remember
to remove the key from the ignition switch.
CAUTION
Children or bystanders may be injured if they
move or attempt to operate the tractor while it is
unattended.
Always remove the ignition key and set the parking
brake when leaving the machine unattended, even
if just for a few minutes.
Using the Rotation Indicator
The slots in the top of the belt covers allow the
operator to verify if the blades have stopped rotating
after disengaging the power take-off (PTO) switch.
Disengage the power take-off (PTO) switch, stop the
engine, remove the key, and wait for all moving parts to
stop before leaving the operating position.
G015493
1
1 2
1
Figure 24
52 inch mower deck shown
1.
Rotation Indicator - slots
in the top of the belt cover
2.
Side discharge chute
Pushing the Machine by Hand
The by-pass valves allow the machine to be pushed by
hand without the engine running.
Important:
Always push the machine by hand.
Never tow the machine because hydraulic damage
may occur.
To Push the Machine
1. Disengage the PTO, move the motion control
levers to the neutral locked position and set the
parking brake.
2. Open the by-pass valve on both pumps by turning
them counter clockwise 1 to 2 turns. This allows
hydraulic fluid to by-pass the pumps and the wheels
to turn (Figure 25).
Note:
Rotate the by-pass valves a maximum of 2
turns so the valve does not come out of the body
causing fluid to run out.
Figure 25
1.
Pump by-pass valve
3. Release the parking brake.
4. Push the machine to the desired location.
5. Set the parking brake.
6. Close the by-pass valves, but do not overtighten
them.
Important:
Do not start or operate the
machine with the by-pass valves open. Damage
to system may occur.
Transporting Machines
Use a heavy-duty trailer or truck to transport the
machine. Ensure that the trailer or truck has all
necessary brakes, lighting, and marking as required by
law. Please carefully read all the safety instructions.
Knowing this information could help you, your family,
pets or bystanders avoid injury.
To transport the machine:
1. Raise the platform of the machine before driving up
onto the trailer or truck.
23
